|
|
| 25.433 | 0164 | - | F | 3.1.0 | R1999 | NBAP ASN.1 merge file |
R3-001657
| agreed | | |
RP-000253
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0163 | 1 | D | 3.1.0 | R1999 | Transforming tabular format Choices to ASN.1 for RNSAP |
R3-001637
| agreed | RAN3-#13 | |
RP-000252
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0162 | - | F | 3.1.0 | R1999 | Corrections on inconsistency sync channel definition for TDDs |
R3-001498
| agreed | RAN3-#13 | |
RP-000252
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0160 | - | D | 3.1.0 | R1999 | Section 9.1 alignment |
R3-001480
| agreed | RAN3-#13 | |
RP-000251
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0159 | - | B | 3.1.0 | R1999 | DL ISCP values for Node B |
R3-001453
| agreed | RAN3-#13 | |
RP-000251
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0158 | - | F | 3.1.0 | R1999 | Updated on cause values on msg and RL level in NBAP (update TDOC R3-001120/CR086r1) |
R3-001450
| agreed | RAN3-#13 | |
RP-000251
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0156 | 2 | B | 3.1.0 | R1999 | Power Offset for S-CCPCH |
R3-001585
| agreed | RAN3-#13 | |
RP-000252
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0154 | - | D | 3.1.0 | R1999 | Correction of reference handling and some other editorial issues |
R3-001445
| agreed | RAN3-#13 | |
RP-000251
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0153 | 2 | F | 3.1.0 | R1999 | Clarification to NBAP Message Syntax |
R3-001630
| agreed | RAN3-#13 | |
RP-000252
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0152 | - | F | 3.1.0 | R1999 | Definition of the Relation between the Tabular Format and ASN.1 in NBAP |
R3-001432
| agreed | RAN3-#13 | |
RP-000251
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0151 | - | D | 3.1.0 | R1999 | Editorial corrections for NBAP (IEs) |
R3-001420
| agreed | RAN3-#13 | |
RP-000251
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0150 | 1 | F | 3.1.0 | R1999 | Correction of implementation on version |
R3-001476
| agreed | RAN3-#13 | |
RP-000251
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0149 | 2 | F | 3.1.0 | R1999 | Handling of measurements non available |
R3-001640
| agreed | RAN3-#13 | |
RP-000252
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0148 | 2 | F | 3.1.0 | R1999 | Reference for the limited power increase algorithm |
R3-001584
| agreed | RAN3-#13 | |
RP-000252
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0147 | 2 | F | 3.1.0 | R1999 | Alignment of System Information |
R3-001591
| agreed | RAN3-#13 | |
RP-000252
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0146 | 1 | C | 3.1.0 | R1999 | Update on compressed mode handling |
R3-001609
| agreed | | |
RP-000253
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0145 | 2 | F | 3.1.0 | R1999 | Introduction of SFN IE |
R3-001568
| agreed | RAN3-#13 | |
RP-000252
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0142 | - | D | 3.1.0 | R1999 | Clarification of Common measurement object IE |
R3-001305
| agreed | RAN3-#13 | |
RP-000251
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0141 | 1 | F | 3.1.0 | R1999 | Mismatch between measurement type and object |
R3-001488
| agreed | RAN3-#13 | |
RP-000251
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0140 | - | F | 3.1.0 | R1999 | Definition Node B and CRNC communication contexts |
R3-001300
| agreed | RAN3-#13 | |
RP-000251
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0139 | - | D | 3.1.0 | R1999 | Clarification of notations used in NBAP |
R3-001297
| agreed | RAN3-#13 | |
RP-000251
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0138 | 1 | F | 3.1.0 | R1999 | Simplified fault handling for CTrCh Reconfiguration |
R3-001529
| agreed | RAN3-#13 | |
RP-000252
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0137 | 1 | F | 3.1.0 | R1999 | Ambiguous CTrCh Setup Resp |
R3-001527
| agreed | RAN3-#13 | |
RP-000252
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0136 | 1 | F | 3.1.0 | R1999 | PRACH scambling code word |
R3-001532
| agreed | RAN3-#13 | |
RP-000252
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0135 | - | F | 3.1.0 | R1999 | Addition of DL TPC step sizes |
R3-001283
| agreed | RAN3-#13 | |
RP-000251
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0134 | 1 | F | 3.1.0 | R1999 | Clarification on ALLNBCC |
R3-001562
| agreed | RAN3-#13 | |
RP-000252
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0133 | 2 | F | 3.1.0 | R1999 | Transport bearer related parameters |
R3-001614
| agreed | RAN3-#13 | |
RP-000252
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0132 | - | F | 3.1.0 | R1999 | Granularity of Max DL power capability/transmission power |
R3-001278
| agreed | RAN3-#13 | |
RP-000250
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0131 | - | C | 3.1.0 | R1999 | Basic protocol robustness |
R3-001277
| agreed | RAN3-#13 | |
RP-000250
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0130 | - | F | 3.1.0 | R1999 | Handling of presence field |
R3-001274
| agreed | RAN3-#13 | |
RP-000250
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0128 | 1 | B | 3.1.0 | R1999 | Introduction of first RLS indicator |
R3-001489
| agreed | RAN3-#13 | |
RP-000251
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0127 | - | F | 3.1.0 | R1999 | RACH Slot format IE mismatch |
R3-001311
| agreed | RAN3-#13 | |
RP-000251
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0126 | - | F | 3.1.0 | R1999 | Message type IE corrections |
R3-001310
| agreed | RAN3-#13 | |
RP-000251
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0125 | - | F | 3.1.0 | R1999 | AICH Transmissing Timing IE corrections |
R3-001309
| agreed | RAN3-#13 | |
RP-000251
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0124 | 1 | F | 3.1.0 | R1999 | Alignment of Diversity Indication IE between tabular format and ASN.1 |
R3-001497
| agreed | RAN3-#13 | |
RP-000252
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0123 | 3 | F | 3.1.0 | R1999 | Downlink power balancing |
R3-001611
| agreed | RAN3-#13 | |
RP-000252
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0122 | - | F | 3.1.0 | R1999 | Clarification that basid Per is used |
R3-001268
| agreed | RAN3-#13 | |
RP-000250
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0121 | 1 | F | 3.1.0 | R1999 | Range bounds related to TFCS, TFS and PDSCH code mapping |
R3-001528
| agreed | RAN3-#13 | |
RP-000252
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0120 | - | F | 3.1.0 | R1999 | Measurement periods and accuracy for TDD |
R3-001360
| agreed | RAN3-#13 | |
RP-000251
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0119 | 2 | F | 3.1.0 | R1999 | Change of definition of the Quality Estimation (QE) for TDD |
R3-001565
| agreed | RAN3-#13 | |
RP-000252
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0118 | 1 | B | 3.1.0 | R1999 | Introduction of Rx Timing Deviation measurement for TDD for locations services |
R3-001484
| agreed | RAN3-#13 | |
RP-000250
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0113 | - | F | 3.1.0 | R1999 | (ASN.1) Error Indication and Private message for common procedure |
R3-001320
| agreed | RAN3-#13 | |
RP-000251
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0112 | 1 | D | 3.1.0 | R1999 | Editorial correction for NBAP ASN.1 |
R3-001469
| agreed | RAN3-#13 | |
RP-000252
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0110 | 2 | F | 3.1.0 | R1999 | More stringent power control behaviour specification in NBAP |
R3-001520
| agreed | RAN3-#13 | |
RP-000252
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0109 | - | B | 3.1.0 | R1999 | NBAP range bounds, TDD parts |
R3-001192
| agreed | RAN3-#12 | |
RP-000250
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0107 | 3 | F | 3.1.0 | R1999 | UL Power Clarification for Node B generated SIB in TDD |
R3-001575
| agreed | RAN3-#13 | |
RP-000252
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0104 | - | F | 3.1.0 | R1999 | NBAP range bounds in ASN.1 description: FDD parts |
R3-001127
| agreed | RAN3-#12 | |
RP-000250
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0103 | 1 | F | 3.1.0 | R1999 | Clarification of Radio Link Reconfiguration with CCTrCH and DPCH deletion in TDD |
R3-001350
| agreed | RAN3-#13 | |
RP-000251
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0102 | 1 | C | 3.1.0 | R1999 | Introduction of RLS in 25.433 |
R3-001236
| agreed | | |
RP-000250
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0100 | 1 | F | 3.1.0 | R1999 | Modification to TFS definition [NBAP] |
R3-001197
| agreed | RAN3-#12 | |
RP-000250
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0097 | 1 | F | 3.1.0 | R1999 | DCH and DSCH information response in RL Reconfiguration Ready message |
R3-001204
| agreed | RAN3-#12 | |
RP-000250
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0096 | 5 | C | 3.1.0 | R1999 | Addition of limited power increase parameters in Cell Setup and Reconfiguration |
R3-001590
| agreed | RAN3-#13 | |
RP-000252
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0094 | 2 | F | 3.1.0 | R1999 | Correction to the limited power increase parameter |
R3-001258
| agreed | RAN3-#12 | |
RP-000250
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0093 | 3 | F | 3.1.0 | R1999 | Clarification on the Combining Control field: Update to R3-001209 |
R3-001262
| agreed | RAN3-#13 | |
RP-000250
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0092 | 2 | F | 3.1.0 | R1999 | Correction on the definition of RSSI parameter |
R3-001233
| agreed | RAN3-#12 | |
RP-000250
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0091 | 1 | F | 3.1.0 | R1999 | Change INTEGER to ENUMERATED for Paging Indicator Length, IB SG REP IE and TGL IE-25.433 |
R3-001138
| agreed | RAN3-#12 | |
RP-000250
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0090 | 1 | F | 3.1.0 | R1999 | Add NULL for only one component to choose in ASN.1 CHOICE type-25.433. |
R3-001136
| agreed | RAN3-#12 | |
RP-000250
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0089 | 3 | B | 3.1.0 | R1999 | Sync Parameter configuration via NBAP |
R3-001255
| agreed | RAN3-#12 | |
RP-000250
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0088 | 2 | F | 3.1.0 | R1999 | Addition of FP PC transmission timing IE in Cell Setup |
R3-001231
| agreed | RAN3-#12 | |
RP-000250
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0087 | 2 | F | 3.1.0 | R1999 | Clarification of system info broadcast procedure |
R3-001230
| agreed | RAN3-#12 | |
RP-000250
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0084 | 1 | B | 3.1.0 | R1999 | Introduction of RTT measurement |
R3-001130
| agreed | RAN3-#12 | |
RP-000250
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0083 | 1 | F | 3.1.0 | R1999 | Measurement filtering parameters |
R3-001132
| agreed | RAN3-#12 | |
RP-000250
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0082 | 1 | F | 3.1.0 | R1999 | Introduction of state information in procedure description |
R3-001186
| agreed | RAN3-#12 | |
RP-000250
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.433 | 0068 | 10 | B | 3.1.0 | R1999 | NBAP Signalling support for CPCH |
R3-001652
| agreed | | |
RP-000253
| approved | RAN-#8 | R3 | 3.2.0 | |
|