|
| 25.101 | 0039 | - | F | 3.1.0 | R1999 | Modification to the handling of measurement equipment uncertainty |
R4-000291
| agreed | RAN4-#11 | |
RP-000015
| approved | RAN-#7 | R4 | 3.2.0 | |
|
|
| 25.101 | 0038 | - | F | 3.1.0 | R1999 | 384kbps measurement channel is replaced with 10ms TTI |
R4-000292
| agreed | RAN4-#11 | |
RP-000015
| approved | RAN-#7 | R4 | 3.2.0 | |
|
|
| 25.101 | 0037 | - | F | 3.1.0 | R1999 | Reference compressed mode patterns |
R4-000302
| agreed | RAN4-#11 | |
RP-000015
| approved | RAN-#7 | R4 | 3.2.0 | |
|
|
| 25.101 | 0036 | - | F | 3.1.0 | R1999 | Performance requirements for demodulation of DCH in Site Selection Diversity Transmission mode |
R4-000280
| agreed | RAN4-#11 | |
RP-000015
| approved | RAN-#7 | R4 | 3.2.0 | |
|
|
| 25.101 | 0035 | - | F | 3.1.0 | R1999 | UE Minimum TX power change |
R4-000271
| agreed | RAN4-#11 | |
RP-000015
| approved | RAN-#7 | R4 | 3.2.0 | |
|
|
| 25.101 | 0034 | - | F | 3.1.0 | R1999 | Power Control in downlink, constant BLER target |
R4-000293
| agreed | RAN4-#11 | |
RP-000015
| approved | RAN-#7 | R4 | 3.2.0 | |
|
|
| 25.101 | 0033 | - | F | 3.1.0 | R1999 | Performance requirement |
R4-000306
| agreed | RAN4-#11 | |
RP-000015
| approved | RAN-#7 | R4 | 3.2.0 | |
|
|
| 25.101 | 0032 | - | F | 3.1.0 | R1999 | Modifications to requirements for power control steps in uplink |
R4-000276
| agreed | RAN4-#11 | |
RP-000015
| approved | RAN-#7 | R4 | 3.2.0 | |
|
|
| 25.101 | 0031 | - | F | 3.1.0 | R1999 | Correction for reference measurement channel in TS 25.101 |
R4-000269
| agreed | RAN4-#11 | |
RP-000015
| approved | RAN-#7 | R4 | 3.2.0 | |
|
|
| 25.101 | 0030 | - | D | 3.1.0 | R1999 | Clarification of ACLR |
R4-000239
| agreed | RAN4-#11 | |
RP-000015
| approved | RAN-#7 | R4 | 3.2.0 | |
|
|
| 25.101 | 0029 | - | B | 3.1.0 | R1999 | CPCH |
R4-000251
| agreed | RAN4-#11 | |
RP-000015
| approved | RAN-#7 | R4 | 3.2.0 | |
|
|
| 25.101 | 0028 | - | F | 3.1.0 | R1999 | for performance requirement of BTFD |
R4-000204
| agreed | RAN4-#11 | |
RP-000015
| approved | RAN-#7 | R4 | 3.2.0 | |
|
|
| 25.101 | 0027 | - | F | 3.1.0 | R1999 | Measurement channel for UE PCDE test |
R4-000281
| agreed | RAN4-#11 | |
RP-000015
| approved | RAN-#7 | R4 | 3.2.0 | |
|
|
| 25.101 | 0026 | - | F | 3.1.0 | R1999 | UE Modulation performance requirements |
R4-000195
| agreed | RAN4-#11 | |
RP-000015
| approved | RAN-#7 | R4 | 3.2.0 | |
|
|
| 25.101 | 0025 | - | C | 3.1.0 | R1999 | Out-of-synchronisation handling of the UE |
R4-000141
| agreed | RAN4-#11 | |
RP-000015
| approved | RAN-#7 | R4 | 3.2.0 | |
|
|
| 25.101 | 0024 | - | F | 3.1.0 | R1999 | Birth-Death tap delays |
R4-000163
| agreed | RAN4-#11 | |
RP-000015
| approved | RAN-#7 | R4 | 3.2.0 | |
|
|
| 25.101 | 0023 | - | D | 3.1.0 | R1999 | Editorial corrections |
R4-000191
| agreed | RAN4-#11 | |
RP-000015
| approved | RAN-#7 | R4 | 3.2.0 | |
|
|
| 25.101 | 0022 | - | F | 3.1.0 | R1999 | Change of propagation conditions for Case 2 |
R4-000096
| agreed | RAN4-#10 | |
RP-000015
| approved | RAN-#7 | R4 | 3.2.0 | |
|
|
| 25.101 | 0021 | - | D | 3.1.0 | R1999 | Power measurement definitions for wanted signal (in-channel signal) |
R4-000103
| agreed | RAN4-#10 | |
RP-000015
| approved | RAN-#7 | R4 | 3.2.0 | |
|
|
| 25.101 | 0020 | - | F | 3.1.0 | R1999 | Clarifications to measurement channels |
R4-000059
| agreed | RAN4-#10 | |
RP-000015
| approved | RAN-#7 | R4 | 3.2.0 | |
|