|
|
| 25.433 | 1125 | 1 | F | 6.5.0 | Rel-6 | Alignment of NBAP with latest status of EUDCH stage 2 (TS 25.309) and RRC (TS 25.331) |
R3-050785
| agreed | RAN3#47 | |
RP-050229
| approved | RAN#28 | R3 | 6.6.0 | EDCH-IurIub |
|
|
|
| 25.433 | 1124 | 1 | C | 6.5.0 | Rel-6 | Synchronisation for MBMS p-t-m Transmissions from Multiple Cells (Simulcast) |
R3-050704
| agreed | RAN3#47 | |
RP-050228
| approved | RAN#28 | R3 | 6.6.0 | MBMS-RAN |
|
|
|
| 25.433 | 1122 | 1 | B | 6.5.0 | Rel-6 | Introduction of Bundling Feature |
R3-050703
| agreed | RAN3#47 | |
RP-050230
| approved | RAN#28 | R3 | 6.6.0 | EDCH-IurIub |
|
|
|
| 25.433 | 1121 | 1 | F | 6.5.0 | Rel-6 | Correction on E-RGCH Sequence Signature |
R3-050700
| agreed | RAN3#47 | |
RP-050229
| approved | RAN#28 | R3 | 6.6.0 | EDCH-IurIub |
|
|
|
| 25.433 | 1120 | 1 | C | 6.5.0 | Rel-6 | Feature Clean-up: Removal of SSDT |
R3-050806
| agreed | RAN3#47 | |
RP-050219
| approved | RAN#28 | R3 | 6.6.0 | TEI5 |
|
|
|
| 25.433 | 1118 | - | C | 6.5.0 | Rel-6 | Feature Clean-up: Removal of Support of dedicated pilot as sole phase reference |
R3-050654
| agreed | RAN3#47 | |
RP-050220
| approved | RAN#28 | R3 | 6.6.0 | TEI5 |
|
|
|
| 25.433 | 1116 | 1 | C | 6.5.0 | Rel-6 | Feature Clean-up: Removal of 80 ms TTI for DCH for all other cases but when the UE supports SF512 |
R3-050798
| agreed | RAN3#47 | |
RP-050218
| approved | RAN#28 | R3 | 6.6.0 | TEI5 |
|
|
|
| 25.433 | 1114 | 1 | C | 6.5.0 | Rel-6 | Feature clean-up: Removal of DSCH (FDD mode) |
R3-050794
| agreed | RAN3#47 | |
RP-050222
| approved | RAN#28 | R3 | 6.6.0 | TEI5 |
|
|
|
| 25.433 | 1112 | 1 | C | 6.5.0 | Rel-6 | Feature clean-up: Removal of Tx diversity closed loop mode2 |
R3-050750
| agreed | RAN3#47 | |
RP-050221
| approved | RAN#28 | R3 | 6.6.0 | TEI5 |
|
|
|
| 25.433 | 1110 | 1 | C | 6.5.0 | Rel-6 | Feature clean-up: Removal of Compressed mode by puncturing |
R3-050746
| agreed | RAN3#47 | |
RP-050224
| approved | RAN#28 | R3 | 6.6.0 | TEI5 |
|
|
|
| 25.433 | 1108 | 1 | F | 6.5.0 | Rel-6 | E-DCH Maximum Received Total Wide Band Power |
R3-050760
| agreed | RAN3#47 | |
RP-050229
| approved | RAN#28 | R3 | 6.6.0 | EDCH-IurIub |
|
|
|
| 25.433 | 1107 | 2 | F | 6.5.0 | Rel-6 | E-DCH: Provided bit-rate per logical channel priority measurement |
R3-050787
| agreed | RAN3#47 | |
RP-050229
| approved | RAN#28 | R3 | 6.6.0 | EDCH-IurIub |
|
|
|
| 25.433 | 1106 | 2 | F | 6.5.0 | Rel-6 | E-DCH diversity control |
R3-050822
| agreed | RAN3#47 | |
RP-050229
| approved | RAN#28 | R3 | 6.6.0 | EDCH-IurIub |
|
|
|
| 25.433 | 1103 | 2 | F | 6.5.0 | Rel-6 | E-DCH Capacity Consumption Law |
R3-050823
| agreed | RAN3#47 | |
RP-050229
| approved | RAN#28 | R3 | 6.6.0 | EDCH-IurIub |
|
|
|
| 25.433 | 1100 | 1 | F | 6.5.0 | Rel-6 | E-DCH general corrections and improvements |
R3-050697
| agreed | RAN3#47 | |
RP-050229
| approved | RAN#28 | R3 | 6.6.0 | EDCH-IurIub |
|
|
|
| 25.433 | 1099 | 2 | C | 6.5.0 | Rel-6 | Feature Cleanup: Removal of CPCH |
R3-050789
| agreed | RAN3#47 | |
RP-050225
| approved | RAN#28 | R3 | 6.6.0 | TEI5 |
|
|
|
| 25.433 | 1096 | 3 | F | 6.5.0 | Rel-6 | Revision to HARQ Preamble Mode support |
R3-050825
| agreed | RAN3#47 | |
RP-050236
| approved | RAN#28 | R3 | 6.6.0 | RANimp-RABSE-ACKNACK |
|
|
|
| 25.433 | 1095 | - | F | 6.5.0 | Rel-6 | Correction to the on demand mesurement with no DPCH ID in the dedicated measurement procedure for TDD |
R3-050480
| agreed | RAN3#47 | |
RP-050233
| approved | RAN#28 | R3 | 6.6.0 | TEI6 |
|
|
|
| 25.433 | 1094 | - | F | 6.5.0 | Rel-6 | Proposed to 25.433 [Rel-6] on some IEs with SatID |
R3-050477
| agreed | RAN3#47 | |
RP-050233
| approved | RAN#28 | R3 | 6.6.0 | TEI6 |
|
|
|
| 25.433 | 1091 | - | F | 6.5.0 | Rel-6 | Addition of SIB5bis in IB Type |
R3-050468
| agreed | RAN3#47 | |
RP-050236
| approved | RAN#28 | R3 | 6.6.0 | |
|
|
|
| 25.433 | 1088 | 3 | C | 6.5.0 | Rel-6 | Timing maintained hard HO |
R3-050410
| agreed | RAN3#47 | |
RP-050254
| approved | RAN#28 | R3 | 6.6.0 | TEI6 |
|