|
|
| 25.331 | 2615 | - | F | 6.5.0 | Rel-6 | MBMS corrections on signalling optimization |
R2-051562
| agreed | RAN2#47 | |
RP-050316
| approved | RAN#28 | R2 | 6.6.0 | MBMS-RAN |
|
|
|
| 25.331 | 2614 | - | F | 6.5.0 | Rel-6 | SCCPCH timing offset information for FDD MBMS soft combining |
R2-051563
| agreed | RAN2#47 | |
RP-050316
| approved | RAN#28 | R2 | 6.6.0 | MBMS-RAN |
|
|
|
| 25.331 | 2613 | - | B | 6.5.0 | Rel-6 | MBMS asn1 issues |
R2-051559
| agreed | RAN2#47 | |
RP-050316
| approved | RAN#28 | R2 | 6.6.0 | MBMS-RAN |
|
|
|
| 25.331 | 2611 | - | F | 6.5.0 | Rel-6 | Correction to network sharing |
R2-051689
| agreed | RAN2#47 | |
RP-050329
| approved | RAN#28 | R2 | 6.6.0 | NTShar-UTRANEnh |
|
|
|
| 25.331 | 2610 | - | F | 6.5.0 | Rel-6 | Erroneous implementation of CR#2501 in RRC specification v6.5.0. |
R2-051687
| agreed | RAN2#47 | |
RP-050320
| approved | RAN#28 | R2 | 6.6.0 | TEI6 |
|
|
|
| 25.331 | 2609 | 2 | C | 6.5.0 | Rel-6 | Introduction of an S-CCPCH power offset difference in order to improve cell selection for soft and selective combining |
R2-051698
| agreed | RAN2#47 | |
RP-050316
| approved | RAN#28 | R2 | 6.6.0 | MBMS-RAN |
|
|
|
| 25.331 | 2608 | - | B | 6.5.0 | Rel-6 | RLC LI Optimization for VoiP |
R2-051681
| agreed | RAN2#47 | |
RP-050317
| approved | RAN#28 | R2 | 6.6.0 | TEI6 |
|
|
|
| 25.331 | 2607 | 2 | A | 6.5.0 | Rel-6 | UE behaviour for DCH SIR target setting for Downlink power control |
| | | |
RP-050346
| approved | RAN#28 | Ericsson | 6.6.0 | TEI5 |
|
|
|
| 25.331 | 2605 | - | F | 6.5.0 | Rel-6 | Clean-up of R6 ASN.1 leftovers |
R2-051655
| agreed | RAN2#47 | |
RP-050328
| approved | RAN#28 | R2 | 6.6.0 | TEI5, NTShar-UT... |
|
|
|
| 25.331 | 2604 | - | F | 6.5.0 | Rel-6 | Quality measurement corrections |
R2-051654
| agreed | RAN2#47 | |
RP-050320
| approved | RAN#28 | R2 | 6.6.0 | TEI6 |
|
|
|
| 25.331 | 2602 | 1 | F | 6.5.0 | Rel-6 | CCCH message enhancements |
R2-051706
| agreed | RAN2#47 | |
RP-050392
| approved | RAN#28 | R2 | 6.6.0 | TEI6 |
|
|
|
| 25.331 | 2601 | 1 | F | 6.5.0 | Rel-6 | Validity of PtM configurations |
R2-051570
| agreed | RAN2#47 | |
RP-050316
| approved | RAN#28 | R2 | 6.6.0 | MBMS-RAN |
|
|
|
| 25.331 | 2600 | 1 | B | 6.5.0 | Rel-6 | Setting up F-DPCH and E-DCH in RRC connection setup |
R2-051685
| agreed | RAN2#47 | |
RP-050323
| approved | RAN#28 | R2 | 6.6.0 | RANimp-RABSE-Co... |
|
|
|
| 25.331 | 2599 | - | F | 6.5.0 | Rel-6 | Radio link failure in F-DPCH |
R2-051646
| agreed | RAN2#47 | |
RP-050336
| approved | RAN#28 | R2 | 6.6.0 | RANimp-RABSE-Co... |
|
|
|
| 25.331 | 2598 | 2 | F | 6.5.0 | Rel-6 | Alignment of EUDCH RRC Stage-3 to Stage-2 status, including handling of 2 E-RNTIs |
R2-051692
| agreed | RAN2#47 | |
RP-050327
| approved | RAN#28 | R2 | 6.6.0 | |
|
|
|
| 25.331 | 2597 | - | C | 6.5.0 | Rel-6 | Feature Clean Up: Removal of Compressed mode by puncturing |
R2-051641
| agreed | RAN2#47 | |
RP-050313
| approved | RAN#28 | R2 | 6.6.0 | TEI5 |
|
|
|
| 25.331 | 2595 | - | C | 6.5.0 | Rel-6 | Feature Clean Up: Removal of TX diversity closed loop mode 2 |
R2-051639
| agreed | RAN2#47 | |
RP-050312
| approved | RAN#28 | R2 | 6.6.0 | TEI5 |
|
|
|
| 25.331 | 2593 | - | C | 6.5.0 | Rel-6 | Feature Clean Up: Removal of DRAC |
R2-051637
| agreed | RAN2#47 | |
RP-050311
| approved | RAN#28 | R2 | 6.6.0 | TEI5 |
|
|
|
| 25.331 | 2591 | - | C | 6.5.0 | Rel-6 | Feature Clean Up: Removal of dedicated pilot as sole phase reference |
R2-051631
| agreed | RAN2#47 | |
RP-050310
| approved | RAN#28 | R2 | 6.6.0 | TEI5 |
|
|
|
| 25.331 | 2589 | - | C | 6.5.0 | Rel-6 | Feature Clean Up: Removal of CPCH |
R2-051627
| agreed | RAN2#47 | |
RP-050309
| approved | RAN#28 | R2 | 6.6.0 | TEI5 |
|
|
|
| 25.331 | 2587 | - | C | 6.5.0 | Rel-6 | Feature Clean-up: Removal of DSCH (FDD) |
R2-051614
| agreed | RAN2#47 | |
RP-050308
| approved | RAN#28 | R2 | 6.6.0 | TEI5 |
|
|
|
| 25.331 | 2585 | - | C | 6.5.0 | Rel-6 | Feature Clean Up: Removal of SSDT |
R2-051602
| agreed | RAN2#47 | |
RP-050307
| approved | RAN#28 | R2 | 6.6.0 | TEI5 |
|
|
|
| 25.331 | 2583 | - | C | 6.5.0 | Rel-6 | Feature Clean Up: Removal of observed time difference to GSM cell |
R2-051598
| agreed | RAN2#47 | |
RP-050306
| approved | RAN#28 | R2 | 6.6.0 | TEI5 |
|
|
|
| 25.331 | 2581 | - | C | 6.5.0 | Rel-6 | Feature Clean Up: Removal of 80 ms TTI for DCH for all other cases but when the UE supports SF512 |
R2-051594
| agreed | RAN2#47 | |
RP-050305
| approved | RAN#28 | R2 | 6.6.0 | TEI5 |
|
|
|
| 25.331 | 2579 | 3 | B | 6.5.0 | Rel-6 | Support for out-of-sequence PDUs in RLC-UM |
| | | |
RP-050374
| approved | RAN#28 | Qualcomm E | 6.6.0 | TEI6 |
|
|
|
| 25.331 | 2579 | - | F | 6.5.0 | Rel-6 | Support for out-of-sequence PDUs in RLC-UM |
R2-051580
| agreed | RAN2#47 | |
RP-050320
| approved | RAN#28 | R2 | 6.6.0 | TEI6 |
|
|
|
| 25.331 | 2577 | - | C | 6.5.0 | Rel-6 | UE L3 requirements for HS-DSCH mobility |
R2-051578
| agreed | RAN2#47 | |
RP-050320
| approved | RAN#28 | R2 | 6.6.0 | TEI6 |
|
|
|
| 25.331 | 2576 | - | A | 6.5.0 | Rel-6 | Default configuration 13 |
R2-051547
| agreed | RAN2#47 | |
RP-050302
| approved | RAN#28 | R2 | 6.6.0 | TEI5 |
|
|
|
| 25.331 | 2574 | - | A | 6.5.0 | Rel-6 | Default RB identity in IE 'Signalling RB information to setup' |
R2-051545
| agreed | RAN2#47 | |
RP-050302
| approved | RAN#28 | R2 | 6.6.0 | TEI5 |
|
|
|
| 25.331 | 2572 | - | A | 6.5.0 | Rel-6 | CTFC calculation for DCH |
R2-051543
| agreed | RAN2#47 | |
RP-050302
| approved | RAN#28 | R2 | 6.6.0 | TEI5 |
|
|
|
| 25.331 | 2568 | - | A | 6.5.0 | Rel-6 | Correction to handling of keys at inter-RAT handover |
R2-051528
| agreed | RAN2#47 | |
RP-050304
| approved | RAN#28 | R2 | 6.6.0 | TEI5 |
|
|
|
| 25.331 | 2566 | 1 | C | 6.5.0 | Rel-6 | Detection of Activation CFN wraparound in the UE during HS-DSCH cell change |
R2-051208
| agreed | RAN2#46-bis | |
RP-050320
| approved | RAN#28 | R2 | 6.6.0 | TEI6 |
|
|
|
| 25.331 | 2565 | - | F | 6.5.0 | Rel-6 | radio bearer release F-DPCH asn1 |
R2-051204
| agreed | RAN2#46-bis | |
RP-050323
| approved | RAN#28 | R2 | 6.6.0 | RANimp-RABSE-Co... |
|
|
|
| 25.331 | 2564 | - | B | 6.5.0 | Rel-6 | Including HS-DSCH serving cell change in ASU |
R2-051203
| agreed | RAN2#46-bis | |
RP-050320
| approved | RAN#28 | R2 | 6.6.0 | TEI6 |
|
|
|
| 25.331 | 2562 | - | B | 6.5.0 | Rel-6 | Introduction of IE “RB information to reconfigure” in RB SETUP, RB RELEASE messages |
R2-051195
| agreed | RAN2#46-bis | |
RP-050320
| approved | RAN#28 | R2 | 6.6.0 | TEI6 |
|
|
|
| 25.331 | 2561 | 1 | F | 6.5.0 | Rel-6 | Addition of MBMS counting for UEs in Cell_PCH and Cell_FACH states and addition of UE requested p-t-p bearer establishment |
R2-051683
| agreed | RAN2#47 | |
RP-050316
| approved | RAN#28 | R2 | 6.6.0 | MBMS-RAN |
|
|
|
| 25.331 | 2560 | 1 | F | 6.5.0 | Rel-6 | Addition of the number of MBMS Neighbour Cell PTM Information messages to the MBMS Modified Services Information message. |
R2-051214
| agreed | RAN2#46-bis | |
RP-050316
| approved | RAN#28 | R2 | 6.6.0 | MBMS-RAN |
|
|
|
| 25.331 | 2558 | - | F | 6.5.0 | Rel-6 | Measurement report message definition when Inter-RAT cell info indication is used |
R2-051182
| agreed | RAN2#46-bis | |
RP-050320
| approved | RAN#28 | R2 | 6.6.0 | TEI6 |
|
|
|
| 25.331 | 2557 | 1 | F | 6.5.0 | Rel-6 | Correction to the Amount of Reporting |
R2-051216
| agreed | RAN2#46-bis | |
RP-050320
| approved | RAN#28 | R2 | 6.6.0 | |
|
|
|
| 25.331 | 2556 | - | F | 6.5.0 | Rel-6 | Release 6 HS-DSCH operation without a DL DPCH for 3.84 Mcps TDD – Setting of Dhs-sync |
R2-051179
| agreed | RAN2#46-bis | |
RP-050322
| approved | RAN#28 | R2 | 6.6.0 | |
|
|
|
| 25.331 | 2555 | - | F | 6.5.0 | Rel-6 | Closed-Loop Power Control Improvements for 1.28 Mcps TDD – ASN1 Corrections |
R2-051178
| agreed | RAN2#46-bis | |
RP-050324
| approved | RAN#28 | R2 | 6.6.0 | LCRTDD-L23 |
|
|
|
| 25.331 | 2554 | 2 | B | 6.5.0 | Rel-6 | Introduction of inter-frequency RACH measurement reporting |
R2-051653
| agreed | RAN2#47 | |
RP-050320
| approved | RAN#28 | R2 | 6.6.0 | TEI6 |
|
|
|
| 25.331 | 2553 | 2 | C | 6.5.0 | Rel-6 | Signalling of target mode for ROHC operation |
R2-051700
| agreed | RAN2#47 | |
RP-050303
| approved | RAN#28 | R2 | 6.6.0 | RANimp-RABSE |
|
|
|
| 25.331 | 2551 | - | F | 6.5.0 | Rel-6 | Frequency layer dispersion |
R2-051115
| agreed | RAN2#46-bis | |
RP-050316
| approved | RAN#28 | R2 | 6.6.0 | MBMS-RAN |
|
|
|
| 25.331 | 2550 | 1 | F | 6.5.0 | Rel-6 | FACH Measurement Occasion when UE receives MBMS |
R2-051130
| agreed | RAN2#46-bis | |
RP-050316
| approved | RAN#28 | R2 | 6.6.0 | MBMS-RAN |
|
|
|
| 25.331 | 2549 | 1 | F | 6.5.0 | Rel-6 | Correction to MBMS notification procedure |
R2-051129
| agreed | RAN2#46-bis | |
RP-050316
| approved | RAN#28 | R2 | 6.6.0 | MBMS-RAN |
|
|
|
| 25.331 | 2548 | 2 | F | 6.5.0 | Rel-6 | Miscellaneous MBMS corrections (set II) |
R2-051703
| agreed | RAN2#47 | |
RP-050316
| approved | RAN#28 | R2 | 6.6.0 | MBMS-RAN |
|
|
|
| 25.331 | 2547 | - | A | 6.5.0 | Rel-6 | Addition of omitted IE “report criteria” in MEASUREMENT CONTROL message “modify” command |
R2-051157
| agreed | RAN2#46-bis | |
RP-050302
| approved | RAN#28 | R2 | 6.6.0 | TEI5 |
|
|
|
| 25.331 | 2545 | - | A | 6.5.0 | Rel-6 | Timing Reinitialized Handover & Radio Link Timing Adjustment |
R2-051151
| agreed | RAN2#46-bis | |
RP-050302
| approved | RAN#28 | R2 | 6.6.0 | TEI5 |
|
|
|
| 25.331 | 2542 | - | F | 6.5.0 | Rel-6 | Merged alignement w.r.t. network sharing functionality |
R2-051094
| agreed | RAN2#46-bis | |
RP-050329
| approved | RAN#28 | R2 | 6.6.0 | NTShar-UTRANEnh |
|
|
|
| 25.331 | 2541 | 1 | C | 6.5.0 | Rel-6 | Removal of unnecessary Start values |
R2-051652
| agreed | RAN2#47 | |
RP-050320
| approved | RAN#28 | R2 | 6.6.0 | TEI6 |
|
|
|
| 25.331 | 2539 | 3 | B | 6.5.0 | Rel-6 | Faster L1 DCH synchronization |
R2-051369
| agreed | RAN2#47 | |
RP-050253
| approved | RAN#28 | R2 | 6.6.0 | TEI6 |
|