|
|
| 25.423 | 1081 | - | B | 6.5.0 | Rel-6 | Direct Information Transfer for MBMS purposes |
R3-050818
| agreed | RAN3#47 | |
RP-050228
| approved | RAN#28 | R3 | 6.6.0 | MBMS-RAN |
|
|
|
| 25.423 | 1080 | 1 | B | 6.5.0 | Rel-6 | Congestion control for HSDPA |
R3-050774
| agreed | RAN3#47 | |
RP-050235
| approved | RAN#28 | R3 | 6.6.0 | TEI6 |
|
|
|
| 25.423 | 1078 | 1 | F | 6.5.0 | Rel-6 | Alignment of RNSAP with latest status of EUDCH stage 2 (TS 25.309) and RRC (TS 25.331) |
R3-050784
| agreed | RAN3#47 | |
RP-050229
| approved | RAN#28 | R3 | 6.6.0 | EDCH-IurIub |
|
|
|
| 25.423 | 1077 | 1 | B | 6.5.0 | Rel-6 | Introduction of Bundling Feature |
R3-050702
| agreed | RAN3#47 | |
RP-050230
| approved | RAN#28 | R3 | 6.6.0 | EDCH-IurIub |
|
|
|
| 25.423 | 1076 | 1 | F | 6.5.0 | Rel-6 | Correction on E-RGCH Sequence Signature |
R3-050699
| agreed | RAN3#47 | |
RP-050229
| approved | RAN#28 | R3 | 6.6.0 | EDCH-IurIub |
|
|
|
| 25.423 | 1075 | 1 | C | 6.5.0 | Rel-6 | Feature Clean-up: Removal of SSDT |
R3-050804
| agreed | RAN3#47 | |
RP-050219
| approved | RAN#28 | R3 | 6.6.0 | TEI5 |
|
|
|
| 25.423 | 1073 | - | C | 6.5.0 | Rel-6 | Feature Clean-up: Removal of Support of dedicated pilot as sole phase reference |
R3-050652
| agreed | RAN3#47 | |
RP-050220
| approved | RAN#28 | R3 | 6.6.0 | TEI5 |
|
|
|
| 25.423 | 1071 | 1 | C | 6.5.0 | Rel-6 | Feature Clean-up: Removal of 80 ms TTI for DCH for all other cases but when the UE supports SF512 |
R3-050796
| agreed | RAN3#47 | |
RP-050218
| approved | RAN#28 | R3 | 6.6.0 | TEI5 |
|
|
|
| 25.423 | 1069 | 1 | C | 6.5.0 | Rel-6 | Feature clean-up: Removal of DSCH (FDD mode) |
R3-050792
| agreed | RAN3#47 | |
RP-050222
| approved | RAN#28 | R3 | 6.6.0 | TEI5 |
|
|
|
| 25.423 | 1067 | 1 | C | 6.5.0 | Rel-6 | Feature clean-up: Removal of Tx diversity closed loop mode2 |
R3-050748
| agreed | RAN3#47 | |
RP-050221
| approved | RAN#28 | R3 | 6.6.0 | TEI5 |
|
|
|
| 25.423 | 1065 | 1 | C | 6.5.0 | Rel-6 | Feature clean-up: Removal of Compressed mode by puncturing |
R3-050744
| agreed | RAN3#47 | |
RP-050224
| approved | RAN#28 | R3 | 6.6.0 | TEI5 |
|
|
|
| 25.423 | 1060 | 1 | F | 6.5.0 | Rel-6 | E-DCH general corrections and improvements |
R3-050698
| agreed | RAN3#47 | |
RP-050229
| approved | RAN#28 | R3 | 6.6.0 | EDCH-IurIub |
|
|
|
| 25.423 | 1059 | - | C | 6.5.0 | Rel-6 | Feature Cleanup: Removal of CPCH |
R3-050508
| agreed | RAN3#47 | |
RP-050225
| approved | RAN#28 | R3 | 6.6.0 | TEI5 |
|
|
|
| 25.423 | 1052 | 3 | F | 6.5.0 | Rel-6 | Revision to HARQ Preamble Mode support |
R3-050824
| agreed | RAN3#47 | |
RP-050236
| approved | RAN#28 | R3 | 6.6.0 | RANimp-RABSE-ACKNACK |
|
|
|
| 25.423 | 1051 | - | F | 6.5.0 | Rel-6 | Correction to the on demand mesurement with no DPCH ID in the dedicated measurement procedure for TDD |
R3-050479
| agreed | RAN3#47 | |
RP-050233
| approved | RAN#28 | R3 | 6.6.0 | TEI6 |
|
|
|
| 25.423 | 1050 | - | F | 6.5.0 | Rel-6 | Proposed to 25.423 [Rel-6] on some IEs with SatID |
R3-050476
| agreed | RAN3#47 | |
RP-050233
| approved | RAN#28 | R3 | 6.6.0 | TEI6 |
|
|
|
| 25.423 | 1046 | 1 | A | 6.5.0 | Rel-6 | Correction to the RL Reconf for serving HS-DSCH cell change |
R3-050691
| agreed | RAN3#47 | |
RP-050217
| approved | RAN#28 | R3 | 6.6.0 | HSDPA-IubIur |
|
|
|
| 25.423 | 1042 | 3 | C | 6.5.0 | Rel-6 | Timing maintained hard HO |
R3-050411
| agreed | RAN3#47 | |
RP-050254
| approved | RAN#28 | R3 | 6.6.0 | TEI6 |
|