|
| 25.331 | 2606 | 2 | F | 5.12.1 | Rel-5 | UE behaviour for DCH SIR target setting for Downlink power control |
| | | |
RP-050346
| approved | RAN#28 | Ericsson | 5.13.0 | TEI5 |
|
|
| 25.331 | 2596 | - | C | 5.12.1 | Rel-5 | Feature Clean Up: Removal of Compressed mode by puncturing |
R2-051640
| agreed | RAN2#47 | |
RP-050313
| approved | RAN#28 | R2 | 5.13.0 | TEI5 |
|
|
| 25.331 | 2594 | - | C | 5.12.1 | Rel-5 | Feature Clean Up: Removal of TX diversity closed loop mode 2 |
R2-051638
| agreed | RAN2#47 | |
RP-050312
| approved | RAN#28 | R2 | 5.13.0 | TEI5 |
|
|
| 25.331 | 2592 | - | C | 5.12.1 | Rel-5 | Feature Clean Up: Removal of DRAC |
R2-051636
| agreed | RAN2#47 | |
RP-050311
| approved | RAN#28 | R2 | 5.13.0 | TEI5 |
|
|
| 25.331 | 2590 | - | C | 5.12.1 | Rel-5 | Feature Clean Up: Removal of dedicated pilot as sole phase reference |
R2-051630
| agreed | RAN2#47 | |
RP-050310
| approved | RAN#28 | R2 | 5.13.0 | TEI5 |
|
|
| 25.331 | 2588 | - | C | 5.12.1 | Rel-5 | Feature Clean Up: Removal of CPCH |
R2-051626
| agreed | RAN2#47 | |
RP-050309
| approved | RAN#28 | R2 | 5.13.0 | TEI5 |
|
|
| 25.331 | 2586 | - | C | 5.12.1 | Rel-5 | Feature Clean-up: Removal of DSCH (FDD) |
R2-051615
| agreed | RAN2#47 | |
RP-050308
| approved | RAN#28 | R2 | 5.13.0 | TEI5 |
|
|
| 25.331 | 2584 | - | C | 5.12.1 | Rel-5 | Feature Clean Up: Removal of SSDT |
R2-051601
| agreed | RAN2#47 | |
RP-050307
| approved | RAN#28 | R2 | 5.13.0 | TEI5 |
|
|
| 25.331 | 2582 | - | C | 5.12.1 | Rel-5 | Feature Clean Up: Removal of observed time difference to GSM cell |
R2-051597
| agreed | RAN2#47 | |
RP-050306
| approved | RAN#28 | R2 | 5.13.0 | TEI5 |
|
|
| 25.331 | 2580 | - | C | 5.12.1 | Rel-5 | Feature Clean Up: Removal of 80 ms TTI for DCH for all other cases but when the UE supports SF512 |
R2-051593
| agreed | RAN2#47 | |
RP-050305
| approved | RAN#28 | R2 | 5.13.0 | TEI5 |
|
|
| 25.331 | 2575 | - | F | 5.12.1 | Rel-5 | Default configuration 13 |
R2-051546
| agreed | RAN2#47 | |
RP-050302
| approved | RAN#28 | R2 | 5.13.0 | TEI5 |
|
|
| 25.331 | 2573 | - | F | 5.12.1 | Rel-5 | Default RB identity in IE 'Signalling RB information to setup' |
R2-051544
| agreed | RAN2#47 | |
RP-050302
| approved | RAN#28 | R2 | 5.13.0 | TEI5 |
|
|
| 25.331 | 2571 | - | F | 5.12.1 | Rel-5 | CTFC calculation for DCH |
R2-051542
| agreed | RAN2#47 | |
RP-050302
| approved | RAN#28 | R2 | 5.13.0 | TEI5 |
|
|
| 25.331 | 2567 | - | F | 5.12.1 | Rel-5 | Correction to handling of keys at inter-RAT handover |
R2-051527
| agreed | RAN2#47 | |
RP-050304
| approved | RAN#28 | R2 | 5.13.0 | TEI5 |
|
|
| 25.331 | 2552 | 2 | C | 5.12.1 | Rel-5 | Signalling of target mode for ROHC operation |
R2-051699
| agreed | RAN2#47 | |
RP-050303
| approved | RAN#28 | R2 | 5.13.0 | RANimp-RABSE |
|
|
| 25.331 | 2546 | - | F | 5.12.1 | Rel-5 | Addition of omitted IE “report criteria” in MEASUREMENT CONTROL message “modify” command |
R2-051156
| agreed | RAN2#46-bis | |
RP-050302
| approved | RAN#28 | R2 | 5.13.0 | TEI5 |
|
|
| 25.331 | 2544 | - | F | 5.12.1 | Rel-5 | Timing Reinitialized Handover & Radio Link Timing Adjustment |
R2-051150
| agreed | RAN2#46-bis | |
RP-050302
| approved | RAN#28 | R2 | 5.13.0 | TEI5 |
|