|
|
| 25.423 | 0141 | - | F | 3.1.0 | R1999 | RNSAP ASN.1 merge file |
R3-001656
| agreed | | |
RP-000244
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0140 | 1 | D | 3.1.0 | R1999 | Transforming tabular format Choices to ASN.1 for NBAP |
R3-001638
| agreed | RAN3-#13 | |
RP-000243
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0139 | - | D | 3.1.0 | R1999 | Rapporteur update to RNSAP symbol update |
R3-001386
| agreed | RAN3-#13 | |
RP-000242
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0138 | - | D | 3.1.0 | R1999 | Section 9.1 alignment |
R3-001479
| agreed | RAN3-#13 | |
RP-000243
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0137 | - | F | 3.1.0 | R1999 | Alignment of Diversity Indication IE between tabular format and ASN.1 |
R3-001385
| agreed | RAN3-#13 | |
RP-000242
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0135 | - | F | 3.1.0 | R1999 | Updated on cause values on msg and RL level in RNSAP (update TDOC R3-001121/CR073r1) |
R3-001451
| agreed | RAN3-#13 | |
RP-000242
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0133 | 2 | B | 3.1.0 | R1999 | LCS support on Iur |
R3-001615
| agreed | RAN3-#13 | |
RP-000243
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0132 | 1 | F | 3.1.0 | R1999 | Clarification to RNSAP Message Syntax |
R3-001465
| agreed | RAN3-#13 | |
RP-000242
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0131 | - | F | 3.1.0 | R1999 | Definition of the Relation between the Tabular Format and ASN.1 in RNSAP |
R3-001431
| agreed | RAN3-#13 | |
RP-000242
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0130 | - | D | 3.1.0 | R1999 | Editorial corrections for RNSAP (IEs) |
R3-001419
| agreed | RAN3-#13 | |
RP-000242
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0129 | - | F | 3.1.0 | R1999 | Tx diversity indicator in neighboring cell information |
R3-001398
| agreed | RAN3-#13 | |
RP-000242
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0128 | 2 | F | 3.1.0 | R1999 | Handling of measurements non available |
R3-001639
| agreed | RAN3-#13 | |
RP-000243
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0127 | 1 | F | 3.1.0 | R1999 | Reference for the limited power increase algorithm |
R3-001502
| agreed | RAN3-#13 | |
RP-000243
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0126 | 2 | C | 3.1.0 | R1999 | Update on compressed mode handling |
R3-001608
| agreed | | |
RP-000244
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0125 | 1 | C | 3.1.0 | R1999 | Correction of DPCH Constant value IE |
R3-001519
| agreed | RAN3-#13 | |
RP-000243
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0124 | - | F | 3.1.0 | R1999 | Correction of STTD Indicator IE |
R3-001381
| agreed | RAN3-#13 | |
RP-000242
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0123 | - | D | 3.1.0 | R1999 | Remocal of the DedicatedMeasurement Type |
R3-001306
| agreed | RAN3-#13 | |
RP-000242
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0122 | - | F | 3.1.0 | R1999 | Mismatch between measurement type and object |
R3-001303
| agreed | RAN3-#13 | |
RP-000242
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0121 | - | F | 3.1.0 | R1999 | Crossing signalling between the Physical Channel Reconfiguration procedure and other procedures. |
R3-001302
| agreed | RAN3-#13 | |
RP-000242
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0120 | 1 | F | 3.1.0 | R1999 | Definition of UE context |
R3-001487
| agreed | RAN3-#13 | |
RP-000243
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0119 | - | D | 3.1.0 | R1999 | Clarification of notations used in RNSAP |
R3-001298
| agreed | RAN3-#13 | |
RP-000242
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0118 | - | F | 3.1.0 | R1999 | Selection of secondary S-CCPCH in RNSAP |
R3-001296
| agreed | RAN3-#13 | |
RP-000241
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0117 | 2 | C | 3.1.0 | R1999 | Alignment of Common TrCH init with RRC |
R3-001574
| agreed | RAN3-#13 | |
RP-000243
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0116 | 1 | F | 3.1.0 | R1999 | Correction of implementation on version 3.0.0 |
R3-001541
| agreed | RAN3-#13 | |
RP-000243
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0115 | - | D | 3.1.0 | R1999 | Correction of reference handling and some other editorial issues |
R3-001284
| agreed | RAN3-#13 | |
RP-000241
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0114 | - | F | 3.1.0 | R1999 | Addition of DL TPC step sizes |
R3-001282
| agreed | RAN3-#13 | |
RP-000241
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0113 | 2 | F | 3.1.0 | R1999 | Transport bearer related parameters |
R3-001616
| agreed | RAN3-#13 | |
RP-000243
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0112 | - | C | 3.1.0 | R1999 | Basic protocol robustness |
R3-001276
| agreed | RAN3-#13 | |
RP-000241
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0111 | - | F | 3.1.0 | R1999 | Handling of presence field |
R3-001273
| agreed | RAN3-#13 | |
RP-000241
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0110 | - | B | 3.1.0 | R1999 | Introduction of first RLS indicator |
R3-001314
| agreed | RAN3-#13 | |
RP-000242
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0109 | - | F | 3.1.0 | R1999 | RL Set info in Dedicated measurement initiation request |
R3-001312
| agreed | RAN3-#13 | |
RP-000242
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0108 | 2 | F | 3.1.0 | R1999 | Downlink power balancing |
R3-001612
| agreed | RAN3-#13 | |
RP-000243
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0107 | - | F | 3.1.0 | R1999 | Clarification that basic Per is used |
R3-001269
| agreed | RAN3-#13 | |
RP-000241
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0106 | 2 | C | 3.1.0 | R1999 | RNSAP support for switching from CELL-DCH to CELL-FACH |
R3-001617
| agreed | RAN3-#13 | |
RP-000243
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0105 | - | F | 3.1.0 | R1999 | Add Block STTD Indicator to TDD Neighbouring Cell Information |
R3-001362
| agreed | RAN3-#13 | |
RP-000242
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0104 | - | F | 3.1.0 | R1999 | Measurement periods and accuracy for TDD |
R3-001359
| agreed | RAN3-#13 | |
RP-000242
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0103 | 2 | F | 3.1.0 | R1999 | Change of definition of the Quality Estimation (QE) for TDD |
R3-001564
| agreed | RAN3-#13 | |
RP-000243
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0102 | 1 | B | 3.1.0 | R1999 | Introduction of Rx Timing Deviation measurement for TDD for location services |
R3-001483
| agreed | RAN3-#13 | |
RP-000243
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0099 | - | D | 3.1.0 | R1999 | Correction of tabular format |
R3-001337
| agreed | RAN3-#13 | |
RP-000242
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0098 | - | F | 3.1.0 | R1999 | Addition criticality information to the CHOICE tags(RNSAP) |
R3-001321
| agreed | RAN3-#13 | |
RP-000242
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0097 | - | D | 3.1.0 | R1999 | Editorial correction for RNSAP |
R3-001319
| agreed | RAN3-#13 | |
RP-000242
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0096 | - | B | 3.1.0 | R1999 | Out-of Sync RNSAP |
R3-001256
| agreed | RAN3-#12 | |
RP-000241
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0095 | - | F | 3.1.0 | R1999 | Handling of closed loop timing mode over RNSAP |
R3-001219
| agreed | RAN3-#12 | |
RP-000241
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0094 | 1 | F | 3.1.0 | R1999 | More stringent power control behaviour specification in RNSAP |
R3-001521
| agreed | RAN3-#13 | |
RP-000243
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0092 | - | F | 3.1.0 | R1999 | RNSAP range bounds, TDD parts |
R3-001193
| agreed | RAN3-#12 | |
RP-000241
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0090 | 3 | F | 3.1.0 | R1999 | DL Initial Power after Handover |
R3-001570
| agreed | RAN3-#13 | |
RP-000243
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0089 | 5 | B | 3.1.0 | R1999 | Timing adjustment IE for Closed loop Tx Diversity mode |
R3-001593
| agreed | | |
RP-000243
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0088 | - | F | 3.1.0 | R1999 | RNSAP range bounds in ASN.1 description: FDD parts |
R3-001126
| agreed | RAN3-#12 | |
RP-000241
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0087 | 1 | F | 3.1.0 | R1999 | Clarification of Radio Link Reconfiguration with CCTrCH and DPCH deletion in TDD |
R3-001351
| agreed | RAN3-#13 | |
RP-000242
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0086 | - | C | 3.1.0 | R1999 | Introduction of RLS in 25.423 |
R3-001116
| agreed | RAN3-#12 | |
RP-000241
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0084 | 3 | F | 3.1.0 | R1999 | Number of DL channelisation code |
R3-001470
| agreed | RAN3-#13 | |
RP-000243
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0082 | 1 | F | 3.1.0 | R1999 | Modification to TFS definition [RNSAP] |
R3-001198
| agreed | RAN3-#12 | |
RP-000241
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0079 | 1 | F | 3.1.0 | R1999 | DCH information response in RL Reconfiguration Ready message |
R3-001205
| agreed | RAN3-#12 | |
RP-000241
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0078 | 2 | F | 3.1.0 | R1999 | Correction to the limited power increase parameter |
R3-001257
| agreed | RAN3-#12 | |
RP-000241
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0077 | 2 | F | 3.1.0 | R1999 | Clarification on the Combining Control field |
R3-001210
| agreed | RAN3-#12 | |
RP-000241
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0076 | 1 | F | 3.1.0 | R1999 | Change INTEGER to ENUMERATED for IB SG REP IE and TGL IE--25.423 |
R3-001139
| agreed | RAN3-#12 | |
RP-000241
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0075 | 1 | F | 3.1.0 | R1999 | Add NULL for only one component to choose in ASN.1 CHOICE type-25.423. |
R3-001137
| agreed | RAN3-#12 | |
RP-000241
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0074 | 6 | C | 3.1.0 | R1999 | Modifications related to DSCH and [TDD USCH] on Iur |
R3-001592
| agreed | RAN3-#13 | |
RP-000243
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0072 | 1 | F | 3.1.0 | R1999 | Alignment of Transaction ID IE with NBAP |
R3-001142
| agreed | RAN3-#12 | |
RP-000241
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0070 | 1 | B | 3.1.0 | R1999 | Introduction of RTT measurement |
R3-001131
| agreed | RAN3-#12 | |
RP-000241
| approved | RAN-#8 | R3 | 3.2.0 | |
|
|
|
| 25.423 | 0069 | 1 | F | 3.1.0 | R1999 | Measurement filtering parameters |
R3-001133
| agreed | RAN3-#12 | |
RP-000241
| approved | RAN-#8 | R3 | 3.2.0 | |
|