|
|
| 25.141 | 0370 | 1 | F | 6.9.0 | Rel-6 | Test configuration for BS with integrated Iuant BS Modem |
R4-050543
| agreed | RAN4#35 | |
RP-050210
| approved | RAN#28 | R4 | 6.10.0 | RANimp-TiltAnt |
|
|
|
| 25.141 | 0370 | - | F | | Rel-6 | Test configuration for BS with integrated Iuant BS Modem |
R4-050387
| revised | RAN4#35 | |
| | | R4 | | RANimp-TiltAnt |
|
|
|
| 25.401 | 0087 | 1 | B | 6.3.0 | Rel-6 | Introduction of Iuant into UTRAN architecture for control of RET Antennas |
R3-041188
| agreed | RAN3#43 | |
RP-040303
| approved | RAN#25 | R3 | 6.4.0 | RANimp-TiltAnt |
|
|
|
| 25.401 | 0087 | - | B | 6.3.0 | Rel-6 | Introduction of Iuant into UTRAN architecture for control of RET Antennas |
R3-041035
| revised | RAN3#43 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.460 | 0006 | - | F | 7.1.0 | Rel-7 | Adaptation of description according to TS25.466 and TS25.462 |
R3-070783
| withdrawn | RAN3#56 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.460 | 0004 | - | B | 6.2.0 | Rel-6 | Configuration and SW Data distribution |
R3-050729
| rejected | RAN3#47 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.460 | 0003 | - | D | 6.1.0 | Rel-6 | Editorial Corrections to 25.460 after RAN3#45 |
R3-050153
| agreed | RAN3#46 | |
RP-050061
| approved | RAN#27 | R3 | 6.2.0 | RANimp-TiltAnt |
|
|
|
| 25.460 | 0002 | 2 | F | 6.0.0 | Rel-6 | Update of Software Download description |
R3-041644
| agreed | RAN3#45 | |
RP-040444
| approved | RAN#26 | R3 | 6.1.0 | RANimp-TiltAnt |
|
|
|
| 25.460 | 0002 | 1 | F | 6.0.0 | Rel-6 | Update of Software Download description |
R3-041627
| revised | RAN3#45 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.460 | 0002 | - | F | 6.0.0 | Rel-6 | Update of Software Download description |
R3-041518
| revised | RAN3#45 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.460 | 0001 | 2 | F | 6.0.0 | Rel-6 | Minor Corrections and editorial changes to 25.460 according to RAN3#44 |
R3-041641
| agreed | RAN3#45 | |
RP-040444
| approved | RAN#26 | R3 | 6.1.0 | RANimp-TiltAnt |
|
|
|
| 25.460 | 0001 | 1 | F | 6.0.0 | Rel-6 | Minor Corrections and editorial changes to 25.460 according to RAN3#44 |
R3-041625
| revised | RAN3#45 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.460 | 0001 | - | F | 6.0.0 | Rel-6 | Minor Corrections and editorial changes to 25.460 according to RAN3#44 |
R3-041449
| revised | RAN3#45 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.461 | 0047 | - | F | 7.4.0 | Rel-7 | Word alignment of station-device |
R3-070785
| agreed | RAN3#56 | Kathrein |
RP-070323
| approved | RAN#36 | R3 | 7.5.0 | RANimp-TiltAnt |
|
|
|
| 25.461 | 0046 | - | F | 7.4.0 | Rel-7 | Description of serial data format |
R3-070784
| rejected | RAN3#56 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.461 | 0041 | 1 | A | 7.1.0 | Rel-7 | RET Control Unit spurious emission simplified version |
R3-051441
| agreed | RAN3#49 | |
RP-050689
| approved | RAN#30 | R3 | 7.2.0 | RANimp-TiltAnt |
|
|
|
| 25.461 | 0041 | - | A | 7.1.0 | Rel-7 | RET Control Unit spurious emission simplified version |
R3-051428
| revised | RAN3#49 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.461 | 0040 | 1 | F | 6.4.0 | Rel-6 | RET Control Unit spurious emission simplified version |
R3-051440
| agreed | RAN3#49 | |
RP-050689
| approved | RAN#30 | R3 | 6.5.0 | RANimp-TiltAnt |
|
|
|
| 25.461 | 0040 | - | F | 6.4.0 | Rel-6 | RET Control Unit spurious emission simplified version |
R3-051427
| revised | RAN3#49 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.461 | 0039 | - | A | 7.1.0 | Rel-7 | correction of referencing |
R3-051426
| agreed | RAN3#49 | |
RP-050689
| approved | RAN#30 | R3 | 7.2.0 | RANimp-TiltAnt |
|
|
|
| 25.461 | 0038 | - | F | 6.4.0 | Rel-6 | correction of referencing |
R3-051425
| agreed | RAN3#49 | |
RP-050689
| approved | RAN#30 | R3 | 6.5.0 | RANimp-TiltAnt |
|
|
|
| 25.461 | 0037 | - | A | 7.1.0 | Rel-7 | Correction to modem isolation and emission |
R3-051397
| agreed | RAN3#49 | |
RP-050689
| approved | RAN#30 | R3 | 7.2.0 | RANimp-TiltAnt |
|
|
|
| 25.461 | 0036 | - | F | 6.4.0 | Rel-6 | Correction to modem isolation and emission |
R3-051396
| agreed | RAN3#49 | |
RP-050689
| approved | RAN#30 | R3 | 6.5.0 | RANimp-TiltAnt |
|
|
|
| 25.461 | 0035 | - | A | 7.1.0 | Rel-7 | Test Procedures |
R3-051395
| agreed | RAN3#49 | |
RP-050689
| approved | RAN#30 | R3 | 7.2.0 | RANimp-TiltAnt |
|
|
|
| 25.461 | 0034 | - | F | 6.4.0 | Rel-6 | Test Procedures |
R3-051394
| agreed | RAN3#49 | |
RP-050689
| approved | RAN#30 | R3 | 6.5.0 | RANimp-TiltAnt |
|
|
|
| 25.461 | 0031 | - | A | 7.0.0 | Rel-7 | BS and RET modem isolation |
R3-051039
| agreed | RAN3#48 | |
RP-050438
| approved | RAN#29 | R3 | 7.1.0 | RANimp-TiltAnt |
|
|
|
| 25.461 | 0030 | - | F | 6.3.0 | Rel-6 | BS and RET modem isolation |
R3-051038
| agreed | RAN3#48 | |
RP-050438
| approved | RAN#29 | R3 | 6.4.0 | RANimp-TiltAnt |
|
|
|
| 25.461 | 0029 | - | A | 7.0.0 | Rel-7 | Intermodulation attenuation for RET |
R3-051037
| agreed | RAN3#48 | |
RP-050438
| approved | RAN#29 | R3 | 7.1.0 | RANimp-TiltAnt |
|
|
|
| 25.461 | 0028 | - | F | 6.3.0 | Rel-6 | Intermodulation attenuation for RET |
R3-051036
| agreed | RAN3#48 | |
RP-050438
| approved | RAN#29 | R3 | 6.4.0 | RANimp-TiltAnt |
|
|
|
| 25.461 | 0027 | - | A | 7.0.0 | Rel-7 | Time delay for RET |
R3-051035
| agreed | RAN3#48 | |
RP-050438
| approved | RAN#29 | R3 | 7.1.0 | RANimp-TiltAnt |
|
|
|
| 25.461 | 0026 | - | F | 6.3.0 | Rel-6 | Time delay for RET |
R3-051034
| agreed | RAN3#48 | |
RP-050438
| approved | RAN#29 | R3 | 6.4.0 | RANimp-TiltAnt |
|
|
|
| 25.461 | 0025 | - | A | 7.0.0 | Rel-7 | Testing for RET |
R3-051033
| agreed | RAN3#48 | |
RP-050438
| approved | RAN#29 | R3 | 7.1.0 | RANimp-TiltAnt |
|
|
|
| 25.461 | 0024 | - | F | 6.3.0 | Rel-6 | Testing for RET |
R3-051032
| agreed | RAN3#48 | |
RP-050438
| approved | RAN#29 | R3 | 6.4.0 | RANimp-TiltAnt |
|
|
|
| 25.461 | 0023 | - | A | 7.0.0 | Rel-7 | Insertion loss for RET |
R3-051031
| agreed | RAN3#48 | |
RP-050438
| approved | RAN#29 | R3 | 7.1.0 | RANimp-TiltAnt |
|
|
|
| 25.461 | 0022 | - | F | 6.3.0 | Rel-6 | Insertion loss for RET |
R3-051030
| agreed | RAN3#48 | |
RP-050438
| approved | RAN#29 | R3 | 6.4.0 | RANimp-TiltAnt |
|
|
|
| 25.461 | 0021 | 1 | A | 7.0.0 | Rel-7 | Power-Up period clarifications |
R3-050989
| agreed | RAN3#48 | |
RP-050438
| approved | RAN#29 | R3 | 7.1.0 | RANimp-TiltAnt |
|
|
|
| 25.461 | 0021 | - | A | 7.0.0 | Rel-7 | Power-Up period clarifications |
R3-050950
| revised | RAN3#48 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.461 | 0020 | 1 | F | 6.3.0 | Rel-6 | Power-Up period clarifications |
R3-050988
| agreed | RAN3#48 | |
RP-050438
| approved | RAN#29 | R3 | 6.4.0 | RANimp-TiltAnt |
|
|
|
| 25.461 | 0020 | - | F | 6.3.0 | Rel-6 | Power-Up period clarifications |
R3-050949
| revised | RAN3#48 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.461 | 0018 | - | F | 6.2.0 | Rel-6 | Time delay clarification |
R3-050780
| agreed | RAN3#47 | |
RP-050237
| approved | RAN#28 | R3 | 6.3.0 | RANimp-TiltAnt |
|
|
|
| 25.461 | 0017 | - | F | 6.2.0 | Rel-6 | BS modem and RET modem return loss at modem frequency |
R3-050779
| agreed | RAN3#47 | |
RP-050237
| approved | RAN#28 | R3 | 6.3.0 | RANimp-TiltAnt |
|
|
|
| 25.461 | 0016 | - | F | 6.2.0 | Rel-6 | BS Modem and RET modem spectrum emission mode |
R3-050778
| agreed | RAN3#47 | |
RP-050237
| approved | RAN#28 | R3 | 6.3.0 | RANimp-TiltAnt |
|
|
|
| 25.461 | 0015 | - | F | 6.2.0 | Rel-6 | BS Modem and RET Modem Filtering |
R3-050777
| agreed | RAN3#47 | |
RP-050237
| approved | RAN#28 | R3 | 6.3.0 | RANimp-TiltAnt |
|
|
|
| 25.461 | 0014 | 2 | C | 6.2.0 | Rel-6 | DC power off reset |
R3-050767
| withdrawn | | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.461 | 0014 | 1 | C | 6.2.0 | Rel-6 | DC power off reset |
R3-050711
| revised | RAN3#47 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.461 | 0014 | - | C | 6.2.0 | Rel-6 | DC power off reset |
R3-050645
| revised | RAN3#47 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.461 | 0013 | 1 | F | 6.2.0 | Rel-6 | DC power on sequence |
R3-050710
| agreed | RAN3#47 | |
RP-050237
| approved | RAN#28 | R3 | 6.3.0 | RANimp-TiltAnt |
|
|
|
| 25.461 | 0013 | - | F | 6.2.0 | Rel-6 | DC power on sequence |
R3-050644
| revised | RAN3#47 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.461 | 0008 | 1 | F | 6.1.0 | Rel-6 | Power consumption clarification of RET |
R3-050265
| agreed | RAN3#46 | |
RP-050061
| approved | RAN#27 | R3 | 6.2.0 | RANimp-TiltAnt |
|
|
|
| 25.461 | 0008 | - | F | 6.1.0 | Rel-6 | Power consumption clarification of RET |
R3-050204
| revised | RAN3#46 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.461 | 0007 | 1 | F | 6.1.0 | Rel-6 | Minor Corrections and editorial changes to 25.461 |
R3-050278
| agreed | RAN3#46 | |
RP-050061
| approved | RAN#27 | R3 | 6.2.0 | RANimp-TiltAnt |
|
|
|
| 25.461 | 0007 | - | F | 6.1.0 | Rel-6 | Minor Corrections and editorial changes to 25.461 |
R3-050131
| revised | RAN3#46 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.461 | 0006 | - | F | 6.1.0 | Rel-6 | Requirements regarding powering on and off of antenna equipment |
R3-050113
| rejected | RAN3#46 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.461 | 0005 | - | F | 6.0.0 | Rel-6 | Minor Corrections and editorial changes to 25.461 |
R3-041534
| agreed | RAN3#45 | |
RP-040444
| approved | RAN#26 | R3 | 6.1.0 | RANimp-TiltAnt |
|
|
|
| 25.461 | 0004 | 1 | F | 6.0.0 | Rel-6 | RET DC power consumption modes |
R3-041672
| agreed | RAN3#45 | |
RP-040444
| approved | RAN#26 | R3 | 6.1.0 | RANimp-TiltAnt |
|
|
|
| 25.461 | 0004 | - | F | 6.0.0 | Rel-6 | RET DC power consumption modes |
R3-041520
| revised | RAN3#45 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.461 | 0003 | - | F | 6.0.0 | Rel-6 | Requirements missing for when the RS485 bus shall not be driven by the secondary device |
R3-041509
| agreed | RAN3#45 | |
RP-040444
| approved | RAN#26 | R3 | 6.1.0 | RANimp-TiltAnt |
|
|
|
| 25.461 | 0002 | 1 | F | 6.0.0 | Rel-6 | Improved demodulator characteristics specification |
R3-041680
| agreed | RAN3#45 | |
RP-040444
| approved | RAN#26 | R3 | 6.1.0 | RANimp-TiltAnt |
|
|
|
| 25.461 | 0002 | - | F | 6.0.0 | Rel-6 | Improved demodulator characteristics specification |
R3-041508
| revised | RAN3#45 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.461 | 0001 | - | F | 6.0.0 | Rel-6 | DC power supply distribution |
R3-041421
| agreed | RAN3#45 | |
RP-040444
| approved | RAN#26 | R3 | 6.1.0 | RANimp-TiltAnt |
|
|
|
| 25.462 | 0026 | 1 | A | 7.2.0 | Rel-7 | Unique ID length |
R3-071113
| agreed | RAN3#56 | Nokia Siemens N... |
RP-070321
| approved | RAN#36 | R3 | 7.3.0 | RANimp-TiltAnt |
|
|
|
| 25.462 | 0026 | - | A | 7.2.0 | Rel-7 | Unique ID length |
R3-071025
| revised | RAN3#56 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.462 | 0025 | 1 | F | 6.4.0 | Rel-6 | Unique ID length |
R3-071112
| agreed | RAN3#56 | Nokia Siemens N... |
RP-070321
| approved | RAN#36 | R3 | 6.5.0 | RANimp-TiltAnt |
|
|
|
| 25.462 | 0025 | - | F | 6.4.0 | Rel-6 | Unique ID length |
R3-071024
| revised | RAN3#56 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.462 | 0024 | - | F | 7.2.0 | Rel-7 | Specification of message gap length |
R3-070787
| agreed | RAN3#56 | Kathrein |
RP-070323
| approved | RAN#36 | R3 | 7.3.0 | RANimp-TiltAnt |
|
|
|
| 25.462 | 0023 | - | F | 7.2.0 | Rel-7 | Word alignment of station-device |
R3-070786
| agreed | RAN3#56 | Kathrein |
RP-070323
| approved | RAN#36 | R3 | 7.3.0 | RANimp-TiltAnt |
|
|
|
| 25.462 | 0022 | 1 | F | 7.1.0 | Rel-7 | Missing requirement of maximum allowed secondary station response time |
R3-070480
| agreed | RAN3#55 | |
RP-070056
| approved | RAN#35 | R3 | 7.2.0 | RANimp-TiltAnt |
|
|
|
| 25.462 | 0020 | 1 | F | 7.1.0 | Rel-7 | Clarification of broadcast message handling after reset (paragraph 4.3) |
R3-070341
| agreed | RAN3#55 | |
RP-070056
| approved | RAN#35 | R3 | 7.2.0 | RANimp-TiltAnt |
|
|
|
| 25.462 | 0020 | - | A | 7.1.0 | Rel-7 | Clarification of broadcast message handling after reset (paragraph 4.3) |
R3-070101
| revised | RAN3#55 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.462 | 0019 | 1 | F | 6.4.0 | Rel-6 | Clarification of broadcast message handling after reset (paragraph 4.3) |
R3-070340
| rejected | RAN3#55 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.462 | 0019 | - | F | 6.4.0 | Rel-6 | Clarification of broadcast message handling after reset (paragraph 4.3) |
R3-070100
| revised | RAN3#55 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.462 | 0018 | 1 | A | 7.0.0 | Rel-7 | Combined XID Negotiations |
R3-061998
| agreed | RAN3#54 | |
RP-060701
| approved | RAN#34 | R3 | 7.1.0 | RANimp-TiltAnt |
|
|
|
| 25.462 | 0018 | - | A | 7.0.0 | Rel-7 | Combined XID Negotiations |
R3-061848
| revised | RAN3#54 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.462 | 0017 | 1 | F | 6.3.0 | Rel-6 | Combined XID Negotiations |
R3-061997
| agreed | RAN3#54 | |
RP-060701
| approved | RAN#34 | R3 | 6.4.0 | RANimp-TiltAnt |
|
|
|
| 25.462 | 0017 | - | F | 6.3.0 | Rel-6 | Combined XID Negotiations |
R3-061847
| revised | RAN3#54 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.462 | 0016 | 2 | F | 6.2.0 | Rel-6 | Removal of Option 4 (use of UI frames) |
R3-051011
| agreed | RAN3#48 | |
RP-050439
| approved | RAN#29 | R3 | 6.3.0 | RANimp-TiltAnt |
|
|
|
| 25.462 | 0016 | 1 | F | 6.2.0 | Rel-6 | Removal of Option 4 (use of UI frames) |
R3-050990
| revised | RAN3#48 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.462 | 0016 | - | F | 6.2.0 | Rel-6 | Removal of Option 4 (use of UI frames) |
R3-050951
| revised | RAN3#48 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.462 | 0015 | 1 | F | 6.2.0 | Rel-6 | Reference update and correction of XID description |
R3-050709
| rejected | RAN3#47 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.462 | 0015 | - | F | 6.2.0 | Rel-6 | Reference update and correction of XID description |
R3-050643
| revised | RAN3#47 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.462 | 0014 | 1 | C | 6.1.0 | Rel-6 | Clarification on unique ID and device scan |
R3-050342
| agreed | RAN3#46 | |
RP-050061
| approved | RAN#27 | R3 | 6.2.0 | RANimp-TiltAnt |
|
|
|
| 25.462 | 0014 | - | C | 6.1.0 | Rel-6 | Clarification on unique ID and device scan |
R3-050273
| revised | RAN3#46 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.462 | 0013 | - | C | 6.1.0 | Rel-6 | Reset in transport layer |
R3-050272
| agreed | RAN3#46 | |
RP-050061
| approved | RAN#27 | R3 | 6.2.0 | RANimp-TiltAnt |
|
|
|
| 25.462 | 0012 | - | C | 6.1.0 | Rel-6 | Reset in the transport layer |
R3-050198
| withdrawn | RAN3#46 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.462 | 0011 | 1 | F | 6.1.0 | Rel-6 | Correction of address assignment example |
R3-050269
| agreed | RAN3#46 | |
RP-050061
| approved | RAN#27 | R3 | 6.2.0 | RANimp-TiltAnt |
|
|
|
| 25.462 | 0011 | - | F | 6.1.0 | Rel-6 | Correction of address assignment example |
R3-050197
| revised | RAN3#46 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.462 | 0010 | - | C | 6.1.0 | Rel-6 | Device scan update |
R3-050196
| withdrawn | RAN3#46 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.462 | 0009 | 1 | F | 6.1.0 | Rel-6 | Clarification on Address Assignment |
R3-050268
| rejected | RAN3#46 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.462 | 0009 | - | F | 6.1.0 | Rel-6 | Clarification on Address Assignment |
R3-050165
| revised | RAN3#46 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.462 | 0008 | - | F | 6.1.0 | Rel-6 | Clarification on HDLC Parameter Negotiation |
R3-050157
| agreed | RAN3#46 | |
RP-050061
| approved | RAN#27 | R3 | 6.2.0 | RANimp-TiltAnt |
|
|
|
| 25.462 | 0007 | 1 | F | 6.1.0 | Rel-6 | Correction of definition of Secondary Payload Transmit/Receive Length |
R3-050267
| agreed | RAN3#46 | |
RP-050061
| approved | RAN#27 | R3 | 6.2.0 | RANimp-TiltAnt |
|
|
|
| 25.462 | 0007 | - | F | 6.1.0 | Rel-6 | Correction of definition of Secondary Payload Transmit/Receive Length |
R3-050156
| revised | RAN3#46 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.462 | 0006 | 1 | D | 6.1.0 | Rel-6 | Editorial Corrections to 25.462 after RAN3#45 |
R3-050266
| agreed | RAN3#46 | |
RP-050061
| approved | RAN#27 | R3 | 6.2.0 | RANimp-TiltAnt |
|
|
|
| 25.462 | 0006 | - | D | 6.1.0 | Rel-6 | Editorial Corrections to 25.462 after RAN3#45 |
R3-050154
| revised | RAN3#46 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.462 | 0005 | - | F | 6.1.0 | Rel-6 | PL field of window size |
R3-050056
| rejected | RAN3#46 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.462 | 0004 | - | F | 6.1.0 | Rel-6 | Improvement of Device Scan Procedure |
R3-050053
| withdrawn | RAN3#46 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.462 | 0003 | 3 | F | 6.0.0 | Rel-6 | Maximum data payload size in the Transport Layer. |
R3-041678
| agreed | RAN3#45 | |
RP-040444
| approved | RAN#26 | R3 | 6.1.0 | RANimp-TiltAnt |
|
|
|
| 25.462 | 0003 | 2 | F | 6.0.0 | Rel-6 | Maximum data payload size in the Transport Layer. |
R3-041637
| revised | RAN3#45 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.462 | 0003 | 1 | F | 6.0.0 | Rel-6 | Maximum data payload size in the Transport Layer. |
R3-041585
| revised | RAN3#45 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.462 | 0003 | - | F | 6.0.0 | Rel-6 | Maximum data payload size in the Transport Layer. |
R3-041529
| revised | RAN3#45 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.462 | 0002 | 1 | C | 6.0.0 | Rel-6 | New reset functionality in the RETAP protocol |
R3-041634
| rejected | RAN3#45 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.462 | 0002 | - | C | 6.0.0 | Rel-6 | New reset functionality in the RETAP protocol |
R3-041525
| revised | RAN3#45 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.462 | 0001 | - | F | 6.0.0 | Rel-6 | Minor Corrections and editorial changes to 25.462 according to RAN3#44 |
R3-041450
| agreed | RAN3#45 | |
RP-040444
| approved | RAN#26 | R3 | 6.1.0 | RANimp-TiltAnt |
|
|
|
| 25.463 | 0072 | 2 | F | 6.6.0 | Rel-6 | GetDeviceData new cause value |
R3-071175
| agreed | RAN3#56 | Nokia Siemens N... |
RP-070321
| approved | RAN#36 | R3 | 6.7.0 | RANimp-TiltAnt |
|
|
|
| 25.463 | 0072 | 1 | F | 6.6.0 | Rel-6 | GetDeviceData new cause value |
R3-071074
| revised | RAN3#56 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0072 | - | F | 6.6.0 | Rel-6 | GetDeviceData new cause value |
R3-071026
| revised | RAN3#56 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0071 | 1 | A | 7.4.0 | Rel-7 | Clarification of additional data beamwidth description |
R3-070347
| agreed | RAN3#55 | |
RP-070055
| approved | RAN#35 | R3 | 7.5.0 | RANimp-TiltAnt |
|
|
|
| 25.463 | 0071 | - | A | 7.4.0 | Rel-7 | Clarification of additional data beamwidth description |
R3-070107
| revised | RAN3#55 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0070 | 1 | F | 6.5.0 | Rel-6 | Clarification of additional data beamwidth description |
R3-070346
| agreed | RAN3#55 | |
RP-070055
| approved | RAN#35 | R3 | 6.6.0 | RANimp-TiltAnt |
|
|
|
| 25.463 | 0070 | - | F | 6.5.0 | Rel-6 | Clarification of additional data beamwidth description |
R3-070106
| revised | RAN3#55 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0069 | 1 | A | 7.4.0 | Rel-7 | Definition of antenna bearing resolution (Annex B) |
R3-070345
| agreed | RAN3#55 | |
RP-070055
| approved | RAN#35 | R3 | 7.5.0 | RANimp-TiltAnt |
|
|
|
| 25.463 | 0069 | - | A | 7.4.0 | Rel-7 | Definition of antenna bearing resolution (Annex B) |
R3-070105
| revised | RAN3#55 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0068 | 1 | F | 6.5.0 | Rel-6 | Definition of antenna bearing resolution (Annex B) |
R3-070344
| agreed | RAN3#55 | |
RP-070055
| approved | RAN#35 | R3 | 6.6.0 | RANimp-TiltAnt |
|
|
|
| 25.463 | 0068 | - | F | 6.5.0 | Rel-6 | Definition of antenna bearing resolution (Annex B) |
R3-070104
| revised | RAN3#55 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0067 | 1 | A | 7.4.0 | Rel-7 | Correction of additional data resolution description (Annex B) |
R3-070343
| agreed | RAN3#55 | |
RP-070055
| approved | RAN#35 | R3 | 7.5.0 | RANimp-TiltAnt |
|
|
|
| 25.463 | 0067 | - | A | 7.4.0 | Rel-7 | Correction of additional data resolution description (Annex B) |
R3-070103
| revised | RAN3#55 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0066 | 1 | F | 6.5.0 | Rel-6 | Correction of additional data resolution description (Annex B) |
R3-070342
| agreed | RAN3#55 | |
RP-070055
| approved | RAN#35 | R3 | 6.6.0 | RANimp-TiltAnt |
|
|
|
| 25.463 | 0066 | - | F | 6.5.0 | Rel-6 | Correction of additional data resolution description (Annex B) |
R3-070102
| revised | RAN3#55 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0065 | 3 | A | 7.4.0 | Rel-7 | Correction of procedure message interpretation |
R3-070516
| agreed | RAN3#55 | |
RP-070055
| approved | RAN#35 | R3 | 7.5.0 | RANimp-TiltAnt |
|
|
|
| 25.463 | 0065 | 2 | A | 7.4.0 | Rel-7 | Correction of procedure message interpretation |
R3-070505
| revised | RAN3#55 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0065 | 1 | A | 7.4.0 | Rel-7 | Correction of procedure message interpretation |
R3-070339
| revised | RAN3#55 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0065 | - | A | 7.4.0 | Rel-7 | Correction of procedure message interpretation |
R3-070099
| revised | RAN3#55 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0064 | 3 | F | 6.5.0 | Rel-6 | Correction of procedure message interpretation |
R3-070515
| agreed | RAN3#55 | |
RP-070055
| approved | RAN#35 | R3 | 6.6.0 | RANimp-TiltAnt |
|
|
|
| 25.463 | 0064 | 2 | F | 6.5.0 | Rel-6 | Correction of procedure message interpretation |
R3-070504
| revised | RAN3#55 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0064 | 1 | F | 6.5.0 | Rel-6 | Correction of procedure message interpretation |
R3-070338
| revised | RAN3#55 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0064 | - | F | 6.5.0 | Rel-6 | Correction of procedure message interpretation |
R3-070098
| revised | RAN3#55 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0063 | 1 | A | 7.4.0 | Rel-7 | Correction of MaxDataReceiveLength |
R3-070337
| agreed | RAN3#55 | |
RP-070055
| approved | RAN#35 | R3 | 7.5.0 | RANimp-TiltAnt |
|
|
|
| 25.463 | 0063 | - | A | 7.4.0 | Rel-7 | Correction of MaxDataReceiveLength |
R3-070097
| revised | RAN3#55 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0062 | 1 | F | 6.5.0 | Rel-6 | Correction of MaxDataReceiveLength |
R3-070336
| agreed | RAN3#55 | |
RP-070055
| approved | RAN#35 | R3 | 6.6.0 | RANimp-TiltAnt |
|
|
|
| 25.463 | 0062 | - | F | 6.5.0 | Rel-6 | Correction of MaxDataReceiveLength |
R3-070096
| revised | RAN3#55 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0061 | 1 | A | 7.4.0 | Rel-7 | Disregarded message length (paragraph 6.2.2) |
R3-070374
| agreed | RAN3#55 | |
RP-070055
| approved | RAN#35 | R3 | 7.5.0 | RANimp-TiltAnt |
|
|
|
| 25.463 | 0061 | - | A | 7.4.0 | Rel-7 | Disregarded message length (paragraph 6.2.2) |
R3-070095
| revised | RAN3#55 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0060 | 1 | F | 6.5.0 | Rel-6 | Disregarded message length (paragraph 6.2.2) |
R3-070373
| agreed | RAN3#55 | |
RP-070055
| approved | RAN#35 | R3 | 6.6.0 | RANimp-TiltAnt |
|
|
|
| 25.463 | 0060 | - | F | 6.5.0 | Rel-6 | Disregarded message length (paragraph 6.2.2) |
R3-070094
| revised | RAN3#55 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0058 | 1 | A | 7.2.0 | Rel-7 | Return codes in response message |
R3-060831
| agreed | RAN3#52 | |
RP-060286
| approved | RAN#32 | R3 | 7.3.0 | RANimp-TiltAnt |
|
|
|
| 25.463 | 0058 | - | A | 7.2.0 | Rel-7 | Return codes in response message |
R3-060677
| revised | RAN3#52 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0057 | 1 | F | 6.4.0 | Rel-6 | Return codes in response message |
R3-060830
| agreed | RAN3#52 | |
RP-060286
| approved | RAN#32 | R3 | 6.5.0 | RANimp-TiltAnt |
|
|
|
| 25.463 | 0057 | - | F | 6.4.0 | Rel-6 | Return codes in response message |
R3-060676
| revised | RAN3#52 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0054 | - | A | 7.0.0 | Rel-7 | Missing definitions for Vendor Specific EP |
R3-050866
| agreed | RAN3#48 | |
RP-050439
| approved | RAN#29 | R3 | 7.1.0 | RANimp-TiltAnt |
|
|
|
| 25.463 | 0053 | - | F | 6.3.0 | Rel-6 | Missing definitions for Vendor Specific EP |
R3-050865
| agreed | RAN3#48 | |
RP-050439
| approved | RAN#29 | R3 | 6.4.0 | RANimp-TiltAnt |
|
|
|
| 25.463 | 0052 | - | C | 6.2.0 | Rel-6 | Removal of Return Code Busy |
R3-050752
| withdrawn | RAN3#47 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0051 | - | D | 6.2.0 | Rel-6 | Parallel procedure handling failure description |
R3-050672
| withdrawn | RAN3#47 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0050 | - | C | 6.2.0 | Rel-6 | Return code update for ResetSoftware |
R3-050671
| withdrawn | RAN3#47 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0049 | - | F | 6.2.0 | Rel-6 | Layer 7 parallel handling |
R3-050670
| withdrawn | RAN3#47 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0048 | - | F | 6.2.0 | Rel-6 | Forward and backward compatibility clarification |
R3-050669
| agreed | RAN3#47 | |
RP-050237
| approved | RAN#28 | R3 | 6.3.0 | RANimp-TiltAnt |
|
|
|
| 25.463 | 0047 | - | F | 6.2.0 | Rel-6 | Configuration data file content |
R3-050668
| rejected | RAN3#47 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0046 | 1 | D | 6.2.0 | Rel-6 | Name change of multiple unit procedures |
R3-050708
| rejected | RAN3#47 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0046 | - | D | 6.2.0 | Rel-6 | Name change of multiple unit procedures |
R3-050642
| revised | RAN3#47 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0045 | 1 | F | 6.2.0 | Rel-6 | Re-defintion of AntennaGetNumberOfAntennas |
R3-050707
| rejected | RAN3#47 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0045 | - | F | 6.2.0 | Rel-6 | Re-defintion of AntennaGetNumberOfAntennas |
R3-050641
| revised | RAN3#47 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0044 | 1 | D | 6.2.0 | Rel-6 | Terminology clean-up |
R3-050706
| rejected | RAN3#47 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0044 | - | D | 6.2.0 | Rel-6 | Terminology clean-up |
R3-050640
| revised | RAN3#47 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0043 | 3 | F | 6.2.0 | Rel-6 | Parallel procedure handling |
R3-050766
| agreed | RAN3#47 | |
RP-050237
| approved | RAN#28 | R3 | 6.3.0 | RANimp-TiltAnt |
|
|
|
| 25.463 | 0043 | 2 | F | 6.2.0 | Rel-6 | Parallel procedure handling |
R3-050756
| revised | RAN3#47 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0043 | 1 | F | 6.2.0 | Rel-6 | Parallel procedure handling |
R3-050705
| revised | RAN3#47 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0043 | - | F | 6.2.0 | Rel-6 | Parallel procedure handling |
R3-050639
| revised | RAN3#47 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0042 | 1 | F | 6.2.0 | Rel-6 | L7 Parallel Handling |
R3-050695
| rejected | RAN3#47 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0042 | - | F | 6.2.0 | Rel-6 | L7 Parallel Handling |
R3-050611
| revised | RAN3#47 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0041 | - | F | 6.2.0 | Rel-6 | Blocking Procedure Specification |
R3-050610
| withdrawn | RAN3#47 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0040 | - | F | 6.2.0 | Rel-6 | RET Device and Units |
R3-050609
| rejected | RAN3#47 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0039 | 2 | F | 6.2.0 | Rel-6 | Set Tilt Correction |
R3-050776
| agreed | RAN3#47 | |
RP-050237
| approved | RAN#28 | R3 | 6.3.0 | RANimp-TiltAnt |
|
|
|
| 25.463 | 0039 | 1 | F | 6.2.0 | Rel-6 | Set Tilt Correction |
R3-050754
| revised | RAN3#47 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0039 | - | F | 6.2.0 | Rel-6 | Set Tilt Correction |
R3-050608
| revised | RAN3#47 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0038 | - | B | 6.2.0 | Rel-6 | Vendor specific procedure |
R3-050453
| agreed | RAN3#47 | |
RP-050238
| approved | RAN#28 | R3 | 6.3.0 | RANimp-TiltAnt |
|
|
|
| 25.463 | 0037 | - | F | 6.2.0 | Rel-6 | Improvement of Annex B |
R3-050418
| agreed | RAN3#47 | |
RP-050237
| approved | RAN#28 | R3 | 6.3.0 | RANimp-TiltAnt |
|
|
|
| 25.463 | 0036 | - | F | 6.2.0 | Rel-6 | Definition of empty string |
R3-050417
| agreed | RAN3#47 | |
RP-050237
| approved | RAN#28 | R3 | 6.3.0 | RANimp-TiltAnt |
|
|
|
| 25.463 | 0035 | - | F | 6.2.0 | Rel-6 | Clarification of Tilt |
R3-050416
| agreed | RAN3#47 | |
RP-050237
| approved | RAN#28 | R3 | 6.3.0 | RANimp-TiltAnt |
|
|
|
| 25.463 | 0033 | - | F | 6.2.0 | Rel-6 | Reserved EP number |
R3-050414
| withdrawn | | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0032 | - | D | 6.2.0 | Rel-6 | Editorial Corrections to 25.463 |
R3-050413
| agreed | RAN3#47 | |
RP-050237
| approved | RAN#28 | R3 | 6.3.0 | RANimp-TiltAnt |
|
|
|
| 25.463 | 0031 | - | F | 6.2.0 | Rel-6 | Antenna Set Device Data |
R3-050412
| agreed | RAN3#47 | |
RP-050237
| approved | RAN#28 | R3 | 6.3.0 | RANimp-TiltAnt |
|
|
|
| 25.463 | 0030 | - | F | 6.1.0 | Rel-6 | Clarification of Alarm state behaviour at loss of DC power and SoftwareReset |
R3-050203
| withdrawn | RAN3#46 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0029 | - | F | 6.1.0 | Rel-6 | Update and correction of GetDeviceData, SetDeviceData and the corresponding fields. |
R3-050202
| rejected | RAN3#46 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0028 | - | D | 6.1.0 | Rel-6 | Name change of multiple unit procedures |
R3-050201
| rejected | RAN3#46 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0027 | - | C | 6.1.0 | Rel-6 | Parallel procedure handling |
R3-050200
| rejected | RAN3#46 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0026 | 1 | C | 6.1.0 | Rel-6 | Redefinition or the Software Reset procedure |
R3-050271
| agreed | RAN3#46 | |
RP-050061
| approved | RAN#27 | R3 | 6.2.0 | RANimp-TiltAnt |
|
|
|
| 25.463 | 0026 | - | C | 6.1.0 | Rel-6 | Redefinition or the Software Reset procedure |
R3-050199
| revised | RAN3#46 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0025 | 2 | F | 6.1.0 | Rel-6 | Clarification on antenna movement during Set Tilt |
R3-050287
| agreed | RAN3#46 | |
RP-050061
| approved | RAN#27 | R3 | 6.2.0 | RANimp-TiltAnt |
|
|
|
| 25.463 | 0025 | 1 | F | 6.1.0 | Rel-6 | Clarification on antenna movement during Set Tilt |
R3-050264
| revised | RAN3#46 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0025 | - | F | 6.1.0 | Rel-6 | Clarification on antenna movement during Set Tilt |
R3-050164
| revised | RAN3#46 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0024 | - | F | 6.1.0 | Rel-6 | Minor Corrections to 25.463 after RAN3#45 |
R3-050158
| agreed | RAN3#46 | |
RP-050061
| approved | RAN#27 | R3 | 6.2.0 | RANimp-TiltAnt |
|
|
|
| 25.463 | 0023 | 1 | D | 6.1.0 | Rel-6 | Editorial Corrections to 25.463 after RAN3#45 |
R3-050270
| agreed | RAN3#46 | |
RP-050061
| approved | RAN#27 | R3 | 6.2.0 | RANimp-TiltAnt |
|
|
|
| 25.463 | 0023 | - | D | 6.1.0 | Rel-6 | Editorial Corrections to 25.463 after RAN3#45 |
R3-050155
| revised | RAN3#46 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0022 | - | F | 6.1.0 | Rel-6 | New procedure to request progress of time consuming procedures |
R3-050112
| rejected | RAN3#46 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0021 | - | F | 6.1.0 | Rel-6 | Format of data length table 5.1.1 |
R3-050057
| withdrawn | RAN3#46 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0020 | - | D | 6.1.0 | Rel-6 | Wrong numbering in table 6.7.6.2 |
R3-050055
| agreed | RAN3#46 | |
RP-050061
| approved | RAN#27 | R3 | 6.2.0 | RANimp-TiltAnt |
|
|
|
| 25.463 | 0019 | - | D | 6.1.0 | Rel-6 | Name of Antenne Get Alarm Status in Table 6.3.3 |
R3-050054
| withdrawn | RAN3#46 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0018 | 2 | F | 6.0.0 | Rel-6 | Redefinition of the Elementary Procedures GetDeviceData and SetDeviceData |
R3-041679
| agreed | RAN3#45 | |
RP-040445
| approved | RAN#26 | R3 | 6.1.0 | RANimp-TiltAnt |
|
|
|
| 25.463 | 0018 | 1 | F | 6.0.0 | Rel-6 | Redefinition of the Elementary Procedures GetDeviceData and SetDeviceData |
R3-041636
| revised | RAN3#45 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0018 | - | F | 6.0.0 | Rel-6 | Redefinition of the Elementary Procedures GetDeviceData and SetDeviceData |
R3-041532
| revised | RAN3#45 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0017 | - | F | 6.0.0 | Rel-6 | Definition of response time in the appication layer. |
R3-041531
| agreed | RAN3#45 | |
RP-040445
| approved | RAN#26 | R3 | 6.1.0 | RANimp-TiltAnt |
|
|
|
| 25.463 | 0016 | 2 | F | 6.0.0 | Rel-6 | Maximum data payload size in elementary procedures. |
R3-041675
| agreed | RAN3#45 | |
RP-040445
| approved | RAN#26 | R3 | 6.1.0 | RANimp-TiltAnt |
|
|
|
| 25.463 | 0016 | 1 | F | 6.0.0 | Rel-6 | Maximum data payload size in elementary procedures. |
R3-041631
| revised | RAN3#45 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0016 | - | F | 6.0.0 | Rel-6 | Maximum data payload size in elementary procedures. |
R3-041530
| revised | RAN3#45 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0015 | 2 | F | 6.0.0 | Rel-6 | Clarification on the intention of the elementary procedures ReadUserData and WriteUserData |
R3-041677
| agreed | RAN3#45 | |
RP-040445
| approved | RAN#26 | R3 | 6.1.0 | RANimp-TiltAnt |
|
|
|
| 25.463 | 0015 | 1 | F | 6.0.0 | Rel-6 | Clarification on the intention of the elementary procedures ReadUserData and WriteUserData |
R3-041635
| revised | RAN3#45 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0015 | - | F | 6.0.0 | Rel-6 | Clarification on the intention of the elementary procedures ReadUserData and WriteUserData |
R3-041528
| revised | RAN3#45 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0014 | - | F | 6.0.0 | Rel-6 | General text improvements |
R3-041527
| withdrawn | | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0013 | 1 | C | 6.0.0 | Rel-6 | New reset functionality in the RETAP protocol |
R3-041638
| rejected | RAN3#45 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0013 | - | C | 6.0.0 | Rel-6 | New reset functionality in the RETAP protocol |
R3-041526
| revised | RAN3#45 | |
| | | R3 | | RANimp-TiltAnt |
|
|
|
| 25.463 | 0012 | 2 | F | 6.0.0 | Rel-6 | Return code clean-up and clarification |
R3-041676
| agreed | RAN3#45 | |
RP-040445
| approved | RAN#26 | R3 | 6.1.0 | RANimp-TiltAnt |
|